knife angle

The simulation study on the knife-back-angle in veneer peeling

旋切机旋刀后角的模拟研究

Look, you should hold the knife at the angle of the cutting bevel.

好的，看着，刀要倾斜一定的角度。

Measure rake angle 、 relief angle and knife gap angle. Discuss the influence to the measurement result caused by the error of the circle center.

对前后角、侧隙角等进行了测量，讨论了回转圆心误差对实际测量的影响。

Effects of knife rake angle on rheological properties of the flakes of poplar and oak wood

刨刀角度对杨木和柞木刨片流变性能的影响

The form and inclination of pitch rails of the veneer lathe, which support and direct the knife assembly, control the knife angle in peeling. The angle of the knife largely determines uniformity of the veneer thickness and surface quality.

旋切机副滑道对刀床起支承和导向作用，它的形状和倾角在旋切过程中控制着旋刀的角度，而刀角在很大程度上决定着单板厚度的均匀度和表面质量。

Influence of curved pitch rail slope angle of veneer lathe on knife angle in peeling

旋切机曲面副滑道倾角在旋切中对旋刀后角的影响

A : Good. Look, you should hold the knife at the angle of the cutting bevel.

好的, 看着, 刀要倾斜一定的角度.

We also analyse different interpolating methods, knife edge, gray-draw, height, angle which effect Function ( MTF ) .

我们主要分析了不同的插值方法, 刀口, 灰度拉伸, 高度, 角度对 MTF 的影响.

Hold the knife at an angle

斜握住刀。

By changing the fixed knife material, adding spacer, repairing the moving knife front and back angle, transforming the casting bond into double one, the effects were obvious.

通过更换定刀材质，加放垫片，动刀修复前后角，改为双铸带头等后，效果显著。

Hold the knife at an angle.

斜握住刀。

To slice, tip the cutting knife up on an angle, to use the far end ( away from you) of the blade.

对于切片而言，先把刀的一端抬起，成三角形，然后用离你较远的那一段的刀刃来切菜。

Studies on the effects of chip thickness, knife rake angle, and wood moisture content on the cutting resistance of 11 coniferous woods

11种针叶树材的切削厚度、刀具前角和木材含水率对切削阻力影响的研究